Richards-Wilcox Canada | Premium Garage Doors

Section Details:

• Section Thickness

• A150 / A150T 1 1/2" (38mm)
• A175 / A175T 1 3/4" (45mm)

• Section Framing

• Fabricated from 6063-T6 aluminum alloy extrusions, extrusion thickness 0.075" (1.9mm) thick, and 0.105" (2.7mm) thick at hardware mounting locations.
• End stiles: 3/8" (86mm) wide aluminum for single end roller brackets; 6 3/8" (162mm) for double end roller brackets
• Centre stiles: 2" (51mm) wide aluminum
• Pair of meeting rails: 3 1/4" (83mm) high, aluminum
• Top and bottom rails: 3 3/8" (86mm) high, aluminum

• Glazing Sections

• 1/8" (3mm) thick or 1/4"* (6mm*) thick clear acrylic, polycarbonate, plain or tempered glass or 1/2" (13mm) thick sealed plain or tempered glass
  * Not available for A150
• Self-aligning glazing retainer

• Paneled Sections

• Fabricated from 0.05" (1.29mm) thick stucco embossed aluminum sheet.

• Thermatite Bottom Section (optional top section)

• Insulated sections fabricated from pre-painted, hot dipped galvanized, steel sheet; with rigid polyurethane insulation core, CFC and HCFC free, face sheet stucco embossed and rib reinforced.
• T150-MR / T150 R 13.21 ft² hF/Btu / U 0.430 W/m²K
• T175-MR / T175 R 16 ft² hF/Btu / U 0.355 W/m²K

• Reinforcement

• 0.105" (2.7mm) thick aluminum extrusion for hardware mounting. Full width integral horizontal, reinforcing truss at each pair of meeting rails. Minimum depth of 1 3/4" (45mm)

• Maximum Opening Width

• All models 16’-2" (4928mm)

• Maximum Opening Height

• All models 16’-0" (4877mm)

• Warranty

• 1 year on materials and workmanship

Colour Options:

Clear* anodizing to AA Spec A-21 (Custom anodized colors are also available). White Duracron Super 600 thermo-setting acrylic enamel.

*Not available for A150

Standard Hardware

• Weatherstripping

  Full length retainer and bulb weather strip minimize air flow and ensure weather-tightness at the base of your door.

• Trussing

  Doors are constructed to withstand wind load specified in ANSI/DASMA 108. Linear style trusses are provided according to door size. Additional trussing can be provided for higher wind load applications.

• Track

  Roll formed from commercial galvanized steel. Vertical tracks sloped to ensure weather tight seal. Horizontal track curve available in 12" (305mm) or normally provided 16" (406mm) radius.

• Track Brackets

  Bolted type, field adjustable, rib reinforced, stamped from 0.123" (3.1 mm) thick commercial galvanized steel.

• Rollers

  Ten ball bearings provide years of smooth and quiet operation. 7/16" (11mm) diameter standard stem, long stem on doors over 16’-2" (4928mm) wide.

• Counter Balance

  Helically wound torsion springs manufactured from oil tempered spring wire, stress relieved, minimum 10,000 cycles. Aluminum die-cast grooved drums. Flexible 7 x 19 construction aircraft type galvanized cables with 5:1 safety factor. Higher cycle available upon request.

• Horizontal Angle

  72" (1829 mm) long or 90" (2286mm) for 3" hardware.

• Hinges

  Linear type, fabricated from 0.078" or 0.106" (2 or 2.7mm) thick zinc plated steel with embossments designed to resist higher load and provide greater stability resulting in improved performance.

• Top Roller Carrier

  Fabricated from zinc plated steel designed to provide greater stability, field adjustable to ensure weather tight seal.

• Roller Brackets

  Linear type fabricated from 0.078" or 0.106" (2 or 2.7mm) zinc plated steel. Graduated type design to ensure weather tight seal.

• Shafts

  1" (25mm) diameter 0.078" (2mm) tube or 1/8" (3mm) wall keyed full length or 1" (25mm) diameter cold rolled galvanized steel keyed full length.

• Head Plates

  Full height fabricated from galvanized steel, complete with bolt-on type bearings.

• Lock

  Interior slide bolt type.

• Mounting Fasteners

  Zinc plated.

Optional Hardware

• Exhaust port: 3" (76 mm) / 4" (102mm) / 5" (127mm) diameter
• Plywood Kick Panel: 3/8" (9.5mm) thick plywood covered on both sides with 0.032" (0.8mm) aluminum or 0.037" (0.94mm) embossed steel sheets